AutoDrill
1221 US Hwy 22
Lebanon, NJ  08833
Ph. 800-871-5022
Fax: 908-542-0242

Send E-Mail
Drilling Primer
AutoDrill Products
Self-Feed AutoTap
Attachments

Spindle Drives
Electro-Mechanical
Pneumatic (Air)
Hydraulic (Oil)

Pneumatic Controls
Electric Controls
Accessories
System Selection
Application Examples
Download Catalog
CAD Drawings
Request Information

multiple spindle drill headmultiple spindle drill headmultiple spindle drill headmultiple spindle drill headmultiple spindle drill headmultiple spindle drill headmultiple spindle drill head



Selecting an AutoDrill System*


AutoDrill systems usually include the following components:

  • AutoDrill Self-Feed Drill Unit
  • Spindle Attachment
  • Spindle Drive
  • Control Components

Determining the Requirements:
  • Select the 2000 Series or 2100 Series Self-Feed Unit depending on your precision and stroke requirements.
  • Choose your Spindle Attachment.
  • Determine the Horsepower, Spindle Speed and Thrust recommended from the "Drill Parameter" chart. The Spindle Drive can then selected from the "Drive Selection" chart.
  • Choose a Pre-Engineered Pneumatic Control System for directional stroke control and sequencing of the system.
Optional accessories, such as Position Switch Kits are available to integrate the system with other operations or PLC controls.


* The above selection criteria is provided for your information. Our Sales and Engineering staff will be happy to recommend the AutoDrill System for your project. All components are factory assembled and tested. Field connections are clearly marked. Our "Safety, Installation, Operating and Maintenance" Manual is shipped with each system.

High Speed Drill Parameter Chart

Dia., in.

1/16

1/8

3/16

1/4

5/16

3/8

1/2

5/8

3/4

1

Aluminum

RPM

10,000

6000

4000

3000

2400

2000

1500

1200

1000

750

HP

.01

.07

.10

.20

.28

.38

.67

1.00

1.37

2.30

Feed, in/rev.

.001

.003

.005

.007

.008

.009

.012

.014

.016

.018

Thrust, lbs.

6

25

50

80

100

125

200

260

335

450

Brass

RPM

10,000

6000

4000

2400

1800

1500

1200

900

750

600

HP

.01

.05

.10

.18

.28

.35

.55

.80

1.10

1.80

Feed, in/rev.

.001

.002

.003

.004

.005

.006

.008

.010

.012

.014

Thrust, lbs.

10

25

45

70

100

135

215

295

395

525

Cast Iron

RPM

6000

3000

2000

1450

1150

975

725

600

500

375

HP

.01

.04

.11

.18

.28

.38

.57

.80

1.10

1.75

Feed, in/rev.

.001

.002

.004

.005

.006

.007

.008

.009

.010

.012

Thrust, lbs.

15

40

100

150

200

260

350

480

550

800

Low Carbon Steel

RPM

4300

2150

1450

1100

900

750

550

450

360

275

HP

.01

.05

.12

.20

.30

.35

.68

1.05

1.50

2.10

Feed, in/rev.

.001

.003

.005

.007

.008

.009

.012

.014

.016

.018

Thrust, lbs.

30

80

145

230

340

440

700

1050

1300

2000

Stainless Steel

RPM

3200

1550

1025

775

620

510

400

310

360

270

HP

.01

.05

.12

.21

.40

.48

.85

1.45

2.05

3.1

Feed, in/rev.

.001

.002

.003

.004

.005

.005

.007

.009

.010

.011

Thrust, lbs.

40

100

180

290

425

465

780

1100

1500

1900

Plastic/Wood

RPM

7000

4000

2700

2000

1600

1400

1000

800

700

550

HP

.01

.07

.10

.12

.14

.16

.20

.30

.42

.70

Feed, in/rev.

.001

.002

.003

.004

.004

.005

.007

.009

.011

.015

Thrust, lbs.

10

20

40

60

70

90

145

175

220

330

Parameters are based upon average conditions. Special conditions, such as deep hole drilling may be different.


Drive Selection

HP

Range Spindle RPM

Arrangement

U

Z

115/230 Volt, 1

230/460 Volt, 3

115/230 Volt, 1

230/460 Volt, 3

1/3

High 2500-4800

BD33XXXXU-1A

BD33XXXXU-3A

BD33XXXXZ-1A

BD33XXXXZ-3A

1/2

High 2500-4800

BD50XXXXU-1A

BD50XXXXU-3A

BD50XXXXZ-1A

BD50XXXXZ-3A

Medium 1055-2499

BD50XXXXU-1B

BD50XXXXU-3B

BD50XXXXZ-1B

BD50XXXXZ-3B

Low 570-1054

BD50XXXXU-1C

BD50XXXXU-3C

BD50XXXXZ-1C

BD50XXXXZ-3C

3/4

Medium 1055-2499

BD75XXXXU-1B

BD75XXXXU-3B

BD75XXXXZ-1B

BD75XXXXZ-3B

Low 570-1054

BD75XXXXU-1C

BD75XXXXU-3C

BD75XXXXZ-1C

BD75XXXXZ-3C

1

Medium 1055-2499

----

BD10XXXXU-3B

----

BD10XXXXZ-3B

Low 570-1054

----

BD10XXXXU-3C

----

BD10XXXXZ-3C

1 1/2

Medium 1055-2499

----

BD15XXXXU-3B

----

BD15XXXXZ-3B

Low 570-1054

----

BD15XXXXU-3C

----

BD15XXXXZ-3C

XXXX is the Spindle RPM. Consult Engineering for special motors and lower speeds. Ask for the free CAD disk.